Introduction to Toilets

Toilet, also known as toilet, is a covered bucket used for urination and defecation. The invention of the toilet is known as a great invention, which solved the problem of people eating, drinking, and urinating in and out. Later, it gradually evolved into a toilet that utilizes principles such as siphon, spiral siphon, and now the latest jet siphon and super spiral siphon. Some people also believe that the flush toilet is the source of all evil because it consumes a large amount of domestic water. There are many classifications of toilets, including split and connected ones. With the development of technology, many novel varieties have also emerged. According to the matching method of the toilet lid, it can also be divided into ordinary toilets and smart toilets. Smart toilets can be further divided into automatic change of seat smart toilets and non automatic change of seat toilets. The former includes different types such as automatic change of seat with flushing, automatic change of seat with flushing, and drying. The history of toilets can be traced back to the Han Dynasty. At that time, toilets were called Huzi and were exclusively used by emperors. Legend has it that they were made of jade. Held by eunuchs who specialize in serving the emperor, for the emperor's convenience at any time. Later in the Tang Dynasty, because there was a person in the imperial family named Li Hu, in order to avoid taboos, Hu Zi was renamed as Beast Zi or Horse Zi. Afterwards, in circulation, it evolved into the term toilet.

2024-05-10

What is the difference between a split toilet?

1. The main characteristics of a split toilet are high water level, strong flushing power, relatively low price, and a variety of styles. The split toilet mainly uses a flush down type for drainage. Because it is a separate unit, the water tank and the main body are not refined together, so the overall quality is consistent. The selectivity of separation is limited by the distance between pits. If it is much smaller than the distance between pits, a wall can be designed behind it. The characteristic of a split toilet is that the water level is high, so it has a lot of impact, but it also produces a lot of noise. Families who like quiet should carefully consider it. The characteristic of a connected toilet is that it is more fashionable in design because the water level in the water storage tank is lower. To ensure the effect, more water is used and the price is higher than that of a separate toilet. 2. Most connected toilets are siphon type and have low noise during operation. In terms of production process, the water tank and the main body are fired together, so the yield of finished products is not high. Due to the low water level of the consortium, the pit spacing of the consortium is generally short in order to increase the flushing force. Connected bodies are not limited by the distance between pits, as long as they are less than the distance between houses. A split toilet, also known as a straight row toilet, has a high impact but also loud noise. Its water tank and toilet are separate, and bolts are needed to connect the toilet and the water tank during installation. 3. The price of a split toilet is relatively cheap, and installation is a bit troublesome. The water tank is prone to damage, but it is not easily clogged. Toilet paper can be directly placed in the toilet, and there is no need to install a paper basket next to the toilet. A connected toilet, also known as a siphon toilet, has a water tank and toilet directly integrated into one unit, which is relatively easy to install but expensive and longer in length than a split toilet. The connected toilet has a siphon jet type (mild noise); Siphon spiral type (fast, thorough, low odor, low noise). Is it better to have a connected or separated toilet as introduced by the editor? What is the difference between a split toilet and a connected toilet? Whether to use a connected or split toilet depends on our household usage, and of course, each has its own advantages and disadvantages. Before purchasing, it is necessary to have a clear understanding. Furthermore, during the use of the toilet, do not casually throw paper scraps or other debris into the toilet to flush away, as it may cause blockage.

2024-05-10

What are the causes of leaking toilets

The problem of water leakage in the bathroom is very common in daily life and brings trouble to our lives, so it needs to be dealt with as soon as possible. Because after the bathroom leaks, we can't use water in the bathroom normally, and when the leakage is serious, it may leak downstairs and bring trouble to others' lives. So, what are the common causes of water leaks in the bathroom? How to fix a leak in the bathroom? Today, Xiao Xiu will introduce the relevant content to you, let's take a look. What are the common causes of water leaks in the bathroom? 1. The bathroom water pipe is not properly installed, and the water pipe is not tightly connected with the floor, resulting in the filling of wooden blocks around the water pipe, and the gap is very large, which affects the combination of the water pipe and the floor, so when using water, it will cause the bathroom to leak. 2. If the waterproof height of the bathroom wall is not enough, then there will be water leakage after frequent water use in the bathroom. 3. The design of the toilet water casing is too short, and it is not about 5cm above the ground in accordance with the relevant regulations, resulting in water leakage around the casing. 4. If the waterproof of the bathroom is not in place or the waterproof layer is damaged, it will also lead to water leakage in the bathroom.

2024-05-10

How to remove dirt from a squatting toilet

1. White vinegar with baking soda. Take an appropriate amount of white vinegar and add a little baking soda powder, mix well, pour it into the toilet, about 15 minutes later, scrub it with a brush, and finally rinse it with water. In addition, we can also put the white vinegar in a bottle with a small hole at the bottom and put it in the water tank, so that the white vinegar will automatically flow out and mix in the water every time we flush, not only to remove dirt but also to disinfect. 2. Coke. You can pour the leftover cola into the toilet bowl and soak it for about an hour, then rinse it with water. Because the main ingredient of cola is carbonic acid, it will react with alkaline dirt to remove dirt and achieve the purpose of cleaning. 3. Toilet cleaner. Nowadays, there are all kinds of them sold in supermarkets, just pour them into a squatting toilet and scrub them. It also works well to use.

2024-05-10

A guide to choosing a squatting urinal

1. The size of the squatting toilet The size of the squatting toilet should be determined according to the size of the bathroom, if the bathroom space is larger, you can install a larger squatting toilet, but if the bathroom area is relatively small, it is not suitable to install a large squatting toilet. 2. Squatting toilet glaze First of all, put the squatting toilet under the light to see if the glaze has pores, and then touch it to see if the glaze is rough and uneven, and try to choose a squatting toilet with the quality of the glaze and the embryo body. 3. The weight of the squatting toilet Generally speaking, the heavier the weight of the squatting toilet, the better the raw materials and firing methods it uses, and the squatting toilet that is too light is easy to be damaged, so it is best not to buy.

2024-05-10

How to fix a leak in the bathroom

1. If the water pipe installed in the bathroom is damaged, causing water leakage in the bathroom, and you don't want to smash the tiles when dealing with it, you can only seal the original water pipe, install a new set of water pipes, change the hidden pipes to exposed pipes, and use exposed pipes when using water later, but it will affect the overall aesthetics of the bathroom. If you don't want to do this, you can find a repairman to smash the bricks and deal with it. After detecting the specific leakage point of the water pipe, you can smash the tiles on the wall and repair or replace the damaged water pipe. 2. If there is a slight damage to the waterproof layer causing water leakage in the bathroom, permeable waterproof materials can be applied inside the bathroom to allow the materials to penetrate into the tiles, forming a new waterproof film. This way, the waterproof layer can be repaired without smashing the tiles, solving the problem of water leakage. Please note that after the waterproof material is completely dry, clean up any residue around it.

2024-05-10